Commander NV100 Clip On Digital Night Vision Unit

Clip On Digital Night Vision

The Commander NV100 is a digital night vision scope that you can easily mount on the back end of your existing rifle scope as a clip-on solution or use as it a handheld spotter. The sleeve included in the box is designed for eyepiece diameter of 42/45 /48 mm (optional). If the eyepiece of your riflescope is much narrower than this, use the supplied tape to achieve the required thickness of the eyepiece (this also prevents scratches to the riflescope once the sleeve is fixed on), put the sleeve on the riflescope and secure it by tightening the screws, making sure that the sleeve is fixed in place.

🔭 NV100 Digital Night Vision Module

• Sensor: Sony STARVIS CMOS, 1920×1080 resolution
• Display: 0.4″ panel, 3.69 million dots, 60 fps refresh rate
• Recording: Built-in video recorder & screenshot function
• Supported SD Card: Up to 256 GB (saves files even if power is disconnected)
• Video Format: H.265 / TS, 1080p or 720p @ 30 fps
• Photo Format: JPEG (1080p / 720p)
• Storage Capacity: Approx 49 hours of video on a 256 GB card
• Digital Zoom: 1× – 3×
• Lens: 16 mm F1.8 (3 cm – ∞ focus range)
• Eye Relief / Diopter: 25 – 70 mm / -8 to +4 adjustment
• Infrared Emitter: 6 W / 850 nm LED with 6 power levels (6000 mW output)
• Night Vision Sensitivity: Operates to 0.0001 Lux; effective range ≈ 300 m / 328 yd
• Power Supply: 5 V–5.5 V via micro-USB (rechargeable 18650 Li-ion battery)
• Battery Life: ≈ 6 hours continuous use
• Construction: Aluminium & ABS/PC body; shock resistant (9000 J); IP weather-sealed
• Display Adjustments: Brightness, contrast, sharpness, and sensor saturation
• Special Modes: Slow-motion ×2 / ×4 / ×8 video playback
• Field of View: 37° – 42°
• Dimensions & Weight: 130 × 52 × 95 mm (≈ 340 g / 12 oz)
• Operating Temperature: -30 °C to +50 °C (-22 °F to +122 °F)

• Firmware updates and support available through WhiteHot.nz – official NZ agent for Oneleaf.